TP-Link MC110CS 10/100Mbps RJ45 to 100Mbps Single-Mode SC Fiber Media Converter

Description

Overview:
The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports Long Wave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, supports both 5VDC and 9VDC external power supply and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers (12.4 miles).
Features:
·
Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
·
Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
·
Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely
·
Extend fiber distance up to 20km (12.4 miles)
·
Easy-to-view LED indicators provide status to monitor network activity easily
·
Supports both 5VDC and 9VDC external power supply
Specification:
MEDIA CONVERTER & MODULE
Standards and Protocols
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Basic Function
Half/Full-Duplex transfer mode for FX port
Full Duplex Flow Control (IEEE 802.3x)
Half Duplex Flow Control (Backpressure)
Extends fiber distance up to 20km
Link Fault Pass through and Far End Fault minimize the loss caused by link failure timely
Ports
1 100M SC/UPC port
1 100M RJ45 port (Auto MDI/MDIX)
Wave Length
1310nm
Network Media 10BASE-T
UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Network Media 100BASE-T
UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Network Media 100BASE-FX
Single-mode Fiber
LED Indicators
PWR, FDX/Col, Link/Act, SPD
Dimensions (W*D*H)
3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
Power Supply
External power supply
Max Power Consumption
1.52W
Safety & Emission
FCC, CE, RoHS
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Return Policy:
Seller provides 30-DAY Return Policy provided that the procedures and requirements referred to below are followed:
Refunds or exchanges may only be made within 30 days of receiving the merchandise.  If an item has been opened or used, a 25% processing fee will be applied for a refund or an exchange.
Products that are returned to Seller with missing, damaged or altered Box, Parts, or Accessories will be either refused or charged a processing fee equal or greater than 25%.
All other returns due to the reason of Order by Mistake, Change of Mind, Doesn't Fit, Found Better Price are subject to a 40% deduction of the original purchase price.  This processing fee is to cover the 2-Way shipping fees of shipping to you and getting the product back.  Please read the description thoroughly to ensure it is the right product for you.  Please feel free to ask if you have any question prior to placing the order.